香港百老汇
DongGuan cnauto automation equipment Co Ltd
总监在线
13713306830
news
position:home > news

Characteristics of high precision jet dispensing valve

writer:点胶阀 time:2020-06-09 21:55 clicks:
 
1. The new dispensing mode adopts non-contact dispensing.
喷射式点胶阀  
2. The dispensing speed is fast, which can achieve 250 points per minute.
 
3. High dispensing accuracy, especially suitable for low viscosity glue spraying.
 
4. The minimum line width can reach 0.12mm.
 
5. The maintenance is simple, the structure is simplified, and the cleaning can be completed in less than three minutes.
 
6. No z-axis movement is required.
点胶控制器  
7. It can apply a variety of glues, including bottom filling glue, silica gel, sealing glue, UV glue, etc.
 
 
 

technical parameter

 
Weight: 250g
 
Minimum working frequency: 250Hz
 
Minimum opening pressure 0.6MPa
 
Feeding pressure 0 ~ 30psi
 
Nozzle aperture: 500Hz
 
Nozzle diameter 200 microns
 
 
 
 
The piezoelectric spray valve needs to be used together with the high-precision motor controller. All parameters are operated by the dispensing controller, such as: the proportion of the suction, the strength of the suction, the size of the air pressure, the amount of glue dripping, etc. the piezoelectric spray valve is mainly used for spraying, and the parameters are adjusted by the controller, and the voltage input is also the function of the high-precision dispensing controller.
 
 
 
There are many types of piezoelectric injection valves, but the types will have different effects. If your company has this demand, welcome to our company, Tel: 13662812001.
XML 地图 | Sitemap 地图